Aqua-SOFT Marine Mats
NOTE: All mat lengths are approximate and the width is actually 47". We can seam the material if you need 48" or above, please email customer service for details.
Aqua-Soft Marine Mats are a less expensive alternative to other drain-thru boat flooring products without compromising appearance or quality! The Aqua-Soft material comes in 4' wide rolls and can be cut to the nearest foot. This vinyl boat flooring can also be seamed to create oversized mats for boat, deck, dock or patio. Standard colors are Beige and Gray.
NOTE: All mat lengths are approximate and the width is actually 46". We can seam the material if you need 48" or above, please email customer service for details.
All Aqua-Soft and Aqua-Deck products are custom cut to order and are non-returnable.
To seam any pieces of PVC Matting, use a clear PVC cement. Place the two pieces tightly together upside down. Place a small bead of pvc cement on the seam and dab it with a paper towel to avoid going through the other side. Place a heavy object on the seam to allow it to set for 12-24 hours . After it is set, roll up the mat gently and turn it right side up carefully as not to break the seam. To bond the front of the mat, Lay a bead inside the seam and allow it to dry . Make sure the seam is invisible. If separated, push together before beading with PVC and set a heavy object (brick) to dry. Allow the glue to dry for at least 12 hours prior to use.
Material: UV resistant vinyl loop
Rolls: 4' x 60'
Colors: Beige or Gray
For use on boats, docks, decks, patios, around pools, showers, saunas, or anywhere drainage matting is needed.
Commercial mats and Rubber offers free shipping in the US on orders over $50!